Answer: The Guide Bar being stressed. The guide bar will be under a lot of stress if the chainsaw blade is positioned incorrectly. This is due to the fact that you will keep attempting to force it into the woods so that it cuts it, which could harm your guide bar.
If you put a chainsaw blade on backwards, it will cut into the saw itself and cause damage. The chain will also come off the saw and could cause injury.
1How Long Does A Chainsaw Chain Last Before It Needs To Be Sharpened
By sharpening a chain as necessary, you can use it for up to 5 or 6 years. However, if your chainsaw is not performing well despite being sharpened and has no other problems, it is time to replace it.
2Does It Matter Which Way A Chainsaw Blade Goes On
No matter the brand or type of chainsaw, the blade always points in the same direction. Therefore, the blade’s cutting edges should always point in the clockwise direction. You’ll see that the sharp edges are facing away from the chainsaw’s body or motor if you look at it from the top.
3Can You Over Tighten A Chainsaw
On the chainsaw, a tension screw can be found close to the base of the bar. Turn the chain in a clockwise direction to tighten it, and a counterclockwise direction to loosen it. Avoid overtightening the chain because doing so could result in a break.
4Why Is My Chainsaw Chain Not Tightening
According to eReplacementParts.com, you should turn the tension control screw to the right to tighten the chain and to the left to loosen it. You might be unable to tighten the chain because you tried turning the tension screw without first loosening the nuts. Once the chain has been properly adjusted, retighten the nuts.
5Why Does The Chain Keep Coming Off My Pole Saw
Why does the chainsaw on my pole keep falling off? The tension may be too loose, causing the pole chainsaw chain to keep falling off. Additionally, if the chain is broken, it might come off.
6Should I Sharpen Chainsaw Chain
A tool that is frequently used will need to be sharpened frequently to ensure that the blade doesn’t get too dull. A chainsaw, for example, may only need to be sharpened once a year if it is rarely used. A chainsaw blade will typically keep its edge after actively cutting through wood for about three hours.
7How Much Play Should A Chainsaw Blade Have
Without much effort, it should “give” away from the bar by about a quarter inch. Finally, tighten the bar nuts while maintaining your grip on the bar’s tip. With the right chain tension, your chainsaw will operate more safely, make better cuts, and last longer.
8Will Any Chainsaw Chain Fit Any Chainsaw
Not every saw will work with every bar or chain. For instance, because it requires more effort to drive a chain around a long bar, larger chainsaw bars are best paired with more potent saws. Therefore, 18″ and shorter bars are used with electric saws. In a similar manner, chainsaw chains are sized to fit particular bars.
9How Do I Know What Chainsaw Blade I Need
Simply count three rivets on the chain and measure the space between them starting from their center points to get the right size. For your size, divide this by half. For instance, multiplying three rivets that are each 12 inch across by two results in a pitch of 14 inch.
10Can Stihl Chainsaws Get Wet
Just make sure to dry the AP battery and tool after use if the battery-powered tool does happen to get wet. Only dry areas should be used for chargers. The following current STIHL AP System models can all be used in the rain: cordless chainsaws MSA 160 C-B, MSA 200 C-B, MSA 220 C-B, and MSA 161 T.
11How Tight Does A Chainsaw Blade Need To Be
While still pulling freely, the chainsaw chain should feel snug. To ensure proper saw chain tension, conduct a “snap” test. Simply release the chain by pulling it down until one or two drive links are visible outside the guide bar rails. The chain should fit into place instantly.
12How Long Should A Chain Saw Blade Stay Sharp
If a tool is used frequently, it will need to be sharpened frequently to prevent the blade from becoming too dull. A chainsaw that is rarely used may only need to be sharpened once a year. A chainsaw blade will typically keep its edge after actively cutting through wood for about three hours.
Related Articles: