What Are The Parts Of A Chainsaw Chain? – Expert’S Opinion

1Are There Different Types Of Chains For Chainsaws

There are three main types of chainsaw chains. Full chisel, semi-chisel, and low profile chains are available, and each is used for a different task. The chain’s teeth are referred to as the “chisel,” and how they are cast affects how well the chain slices through wood.

2What Is Pitch On A Chainsaw Bar

The distance between a chain’s drive links is referred to as pitch. It is calculated by taking the length of any three successive drive links and dividing it by two. The result of dividing 3/4″ by 2 is 3/8″. Pitch can also be expressed as a fraction: 3/8″ is also sometimes written as a decimal:

3What Part Of A Chainsaw Chain Does The Cutting

The saw chain’s cutter is the component that actually cuts things. Left and right hand cutters are on the saw chain to ensure even cutting of the wood.

4Do Chainsaw Chains Have A Master Link

A master link is now a common feature of chainsaw chains. In case the chain needs to be shortened, a master link is especially made to be removed with ease.

5Are There Different Grades Of Chainsaw Chains

There are three main types of chainsaw chains. Full chisel, semi-chisel, and low profile chains are available, and each is used for a different task.

6How Does A Chainsaw Blade Cut

Running a chainsaw. Shavings from a sharp chain travel away from the power head and land on the ground. A straight, true cut is made by the chain being guided through the cut by a clean, well-maintained bar. By reducing the airflow to the power head, a dull chain reduces power by generating sawdust that is sucked into the air filter.

7What Do The Numbers On My Chainsaw Chain Mean

The last set of numbers indicates the number of drive links in the chainsaw chain that will operate on that particular bar. This bar has “72” stamped on it, so it requires a chain with 72 drive links. Depending on your bar size, the number of drive links can be anywhere between 28 and 210. At the end of the bar, there might be a letter.

8How Do I Know If My Chainsaw Chain Is Tight Enough

While still pulling freely, the chainsaw chain should feel snug. To ensure proper saw chain tension, conduct a “snap” test. Simply release the chain by pulling it down until one or two drive links are visible outside the guide bar rails. The chain should fit into place instantly.

9What Do The Numbers On A Chainsaw Chain Mean

.058″ 63.063″ The last set of numbers indicates the number of drive links in the chainsaw chain that will operate on that particular bar. This bar has “72” stamped on it, so it requires a chain with 72 drive links.

10Does Chain Gauge Matter On A Chainsaw

A professional user can learn the strength of a chain’s drive links from the gauge measurement of a saw chain. Although heavier, thicker drive links are typically stronger. Weight has an impact on performance, so it should be kept as low as possible to maximize cutting speed.

11What Do The Chainsaw Blade Numbers Mean

The majority of consumer saws employ a 3/8 “the “low profile” chain. It is known as Picco. Several older saws utilize 1/2 “chain of pitches The drive lugs’ gauge, or thickness, is the second. The most typical sizes are 0.050″ (1.3 mm) and 0.058″ (1.5 mm), with 0.043″ (1.1 mm) and 0.063” (1.6 mm) being less typical.

12How Many Cc Is A 272Xp

72.2 cc of displacement per cylinder. 9300 RPM is the maximum power speed. 13500 RPM is the maximum engine/motor RPM. The idle speed is 2600 RPM.

Related Articles:

• Are Stihl Chainsaws Made In China
• Why Is My Chainsaw Blade Smoking And Not Cutting