Skip to content

How Do You Unlock Pruning Shears? [ Easy Guide ]

✂️ Got only 60 seconds?

Answer: When not in use, most pruners have a thumb-lock mechanism that keeps the pruner securely closed. Simply squeeze the handles together tightly, turn the thumb lock just a little counterclockwise, and release the handles to unlock your garden shears.

How do you unlock pruning Shears?

Pruning shears are very useful tools for gardeners. They are also used by landscapers and homeowners who want to trim trees or shrubs. Pruning shears come in various sizes and shapes. Some are designed specifically for certain types of plants. Others are general purpose.

You can purchase pruning shears at home improvement stores. If you don’t have access to such stores, you can order them online. There are several ways to unlock pruning shears. The most common way is to simply remove the plastic covering from the blades. Another option is to replace the locking mechanism.

1How Do You Use Pruning Shears

Open your pruners all the way, then fully insert the branch. It may be tempting to cut wood with your pruners like you would with scissors, but doing so will strain your hands and blunt the blade tip. Cut it out. Close the loppers through the branch in a single motion once the wood is in the proper position.

2Should You Cut The Tops Off Basil Plants

Even though they are not as big, you DO want to take the leaves that are growing on the top of the plant. This is so that the basil plant can create new branches that grow outward, causing it to develop into a wide, bushy plant rather than a tall one.

3Should You Top Lavender

However, it’s best to attack the plants in two stages, according to Clapp: “Trim after flowering, then prune in the spring.” After the summer has ended, avoid overpruning lavender because the plant might find it difficult to survive the coming of the colder weather.

4How Do You Cut Down A Tree With A Hand Saw

Make a low, horizontal cut through about 40% of the tree’s thickness on the “front” of the tree. Apply steady, firm pressure as you move the saw back and forth to make the cut. Just above the first cut, make a second cut that descends at an angle so the two cuts meet like a piece of pie cut off from the rest.

5Should You Cut Off The Dead Flowers On Geraniums

The best way to keep geraniums blooming is to deadhead or pinch off the dying flowers. The geranium will then direct its energy toward developing fresh flowers as opposed to a flowerhead that is withering.

6When Should Peonies Be Trimmed

Ideally, you should prune your peonies. During the fall, before winter, remove all dead plant matter. According to Pangborn, peonies are prone to foliar fungal problems. If infected foliage is left on the plant over the winter, it may expose new growth to pathogens that have overwintered on the old leaves and caused damage.

7How Far Back Can You Cut Barberry

Cut back any species of barberry all the way to the ground. In its first year, a healthy plant will grow much more than you anticipate if it is in a good location.

8Do You Prune Fig Trees Every Year

Fig tree maintenance is largely centered around pruning. Experts advise pruning the tree twice a year, the second time in the summer. It should be done at least once annually, during the dormant season (winter).

9What Is The Best Time To Prune A Mango Tree

Pruning should be done as soon as the fruit has been harvested and no later than mid-December. Remove any branches that are dead, touching the ground, crossing or rubbing together. Vertical branches are ineffective and should be cut away because fruit can only be produced on horizontal branches.

10How Do You Handle Pruning Shears

Open your pruners completely while maintaining a comfortable grip, then place the branches as close to the deepest part of the blade as possible. Squeeze the handles to close the blades while the wood is fully encased, then quickly slice through the branch.

11How Do You Put The Blade On A Fiskars Tree Pruner

The saw blade and blade housing are easily connected. Place the oblong hole in the blade into the protruding hard plastic portion of the blade housing after inserting the back of the blade into the round hole attached to the blade housing. Then tighten the wing nut that is included. You’re finished!

12Can You Get Loppers Sharpened

Only the outside of the top blade will be sharp on a bypass lopper or pruner designed to cut soft green branches, such as those on roses. To re-sharpen the blade, use a sharpening stone or a carbide blade sharpener. At the same incline as the original slant, pass the sharpener over the bevel.

Related Articles: