Got only 60 seconds?Answer: These devices were created by Husqvarna without a blade. and has never suggested installing a metal blade or adapter on this device. You should consider the larger 300 series of trimmers, as you can use a grass blade on these, if you feel you need the capabilities of a metal blade.
Yes, you can put a saw blade on a Husqvarna 128LD. The Husqvarna 128LD is a versatile trimmer that can also be used as a brush cutter, edger, and pruner. It comes with a detachable shaft that can be easily replaced with different attachments.
1What Attachments Are Compatible With Husqvarna
Type
- Blower attachment(1)
- Cultivator attachment(1)
- Dethatcher attachment(1)
- Edger attachment(1)
- Pole saw attachment(1)
- Straight shaft attachment(1)
- String trimmer harness(1)
2Can I Use A 8 Inch Dado Blade On A 10 Inch Table Saw
As long as your table saw’s or radial-arm saw’s arbor diameter and length are the same, the arbor hole diameter on the stacked dado blade set will fit. A 10-inch table saw can accommodate an 8-inch dado blade.
3Can You Put A Brush Cutter Blade On A Curved Shaft Trimmer
No, metal brush blades of any kind are not intended to be used with curved shaft trimmers.
4Can You Put A Blade On A Curved Shaft Trimmer
No, metal brush blades of any kind are not intended to be used with curved shaft trimmers.
5What Are Old Saw Blades Made Of
High quality steel is almost always the material used to make old saw blades. They are widely available at rummage sales, garage sales, swap meets, etc. The lack of metallurgy required is the main benefit of using an old saw.
6Can You Put A Brush Cutter Blade On Any String Trimmer
If your trimmer’s shaft cannot be separated, you can frequently unscrew the trimmer head and swap it out for a brush-cutter blade. With a few notable exceptions, you’ll need a gas-powered string trimmer to make an efficient brush cutter because they require more power than string trimmers do.
7Is Husqvarna 128Ld Compatible With Trimmer Plus
Husqvarna Husqvarna TPE720 Dual Edger Attachment for Attachment and 128LD 17″ Cutting Path Detachable Gas String Trimmer. capable Polesaws, Powerheads, and String Trimmers The TrimmerPlus.
8Can You Convert A Line Trimmer To A Blade Strimmer
Depending on the model, the exact process for changing the tool from a string trimmer to a brush cutter may vary, but it typically entails removing the string head, switching out the deflector, and attaching the blade. According to Lawn Care Life on YouTube, the procedure is comparable to changing a string trimmer head.
9How Do You Turn A Strimmer Into A Brush Cutter
You can if your trimmer has the necessary features. Replace it with a brush-cutter attachment after separating the trimmer head and a portion of the shaft. If your trimmer’s shaft cannot be separated, you can frequently unscrew the trimmer head and swap it out for a brush-cutter blade.
10Can You Put Any Blade In A Miter Saw
Miter saws work best with blades that have a lot of teeth. Here, we’ll examine the top choices: chopping blade: A miter saw is unquestionably better suited to crosscutting than a table saw, which can handle both ripping and crosscutting. Because of this, you ought to search for a blade with a lot of teeth and small gullets.
11Do You Need To Temper A Knife Made From A Saw Blade
The blade’s hardness is already suitable for maintaining an edge, so. To make a good knife, the steel doesn’t need to be treated. However, you can work around (or with) the fact that blanks cut from the saw are occasionally a little too flexible.
12Can You Make A Knife Out Of A Hand Saw
High-carbon steel is ideal for producing excellent knives with good edge take-up and maintenance. Older hand saws with high-carbon steel are also of excellent quality and will produce exceptionally strong knives that take and maintain a fine edge for a long time.
Related Articles: